Tuesday 22 May 2018

Kareishuu VCO

PCB set = USD23
10HP Panel = USD22
assembled  = USD210

This VCO was mainly designed as an upgrade for the dual OTA VCO. It is a traditional triangle core VCO with a built in VCA for the FM control section. The design draws on sections of the Electronotes EN1, EN2 and EN3 VCOs along with some NLC injected in there for good measure.
It has much better tracking, a sine output and attenuators for all inputs. The self modulation control via the FM VCA enables voltage controlled waveshaping, the sine and tri waves can morph between their original shape to a pulse.

The pot spacing is quite tight, so I suggest using T18 knurled shaft pots along with the micro knobs. Other than the 1k tempco, no rare parts and a fairly easy build.






4 comments:

  1. Will there be a null-a3 in the future with this VCO? :)

    ReplyDelete
    Replies
    1. it would have this or the Plague of Demons. I would like to do a Null-A3, the 1st two were designed for use at a local university so had modules they wanted (such as the ADSR). If a Null-A3 happens it will have expanded versions of my fave modules.

      Delete
  2. Just built it and it's awesome! And actually usable at the same time! Those FMs... Maybe there's some excuse for another one.

    ReplyDelete

Note: only a member of this blog may post a comment.